Guardian features
Every tool your team needs to run remote stations.
Monitoring, control, alarms, history, maintenance and records, built into one system and set up for each of your stations.
Monitor
See every station, live.
Live station visibility
Running or stopped, levels, pressure and flow for every connected pump, with the time of the latest reading always on screen.
- Pump running and stopped feedback
- Water level, pressure and flow readings
- Run hours and starts
- Connection health and last reading time
Station map
Every station on one map, marked by status. Zoom in to show workers and contractors exactly where a site is.
- Online, offline and alarm status at a glance
- Exact site locations for field crews and contractors
Station Health
Know your data is current. Station Health checks the Guardian unit, controller and sensors, so an old reading is never mistaken for a live one.
- Guardian unit and controller connection status
- Unavailable sensors and signals flagged
- Time of the last valid reading
- Offline recording status, where installed
Control and alarms
Act quickly and safely.
Controls and setpoints
Start, stop and change mode on a pump and adjust approved setpoints within the limits set for each station.
- Start, stop and mode controls
- Setpoint changes within each station's limits
- Enable or disable supported operating functions
- Only for authorised users on commissioned stations
Guardian does not replace emergency stops, physical isolation or site procedures.
Alarms and notifications
See what's alarming, where and why. Acknowledge it, alert the right people and keep the full history.
- Active alarms and full alarm history
- Affected station, pump and condition shown
- Acknowledge alarms when authorised
- Alerts to your phone and email
History and reports
Understand what happened and show it.
Trends and incident replay
Pick a station, signals and time period to see how flow, pressure and level changed. Replay the records around any alarm to see what led to it.
- Choose stations, signals and time periods
- Compare flow, pressure, level and other signals
- Replay the records around an alarm
Create and schedule reports
Generate a professional report in seconds, or schedule it to arrive in your inbox.
- Instant reports from the data you choose
- Scheduled delivery to your inbox
- Saved reports kept for every station
Maintenance and records
Every asset's history, in one place.
Equipment records
Every piece of equipment recorded against its station, with service dates and documents attached.
- Equipment details and installation dates
- Run hours and service due dates
- Manuals, drawings and documents stored with the asset
Jobs and service history
Plan servicing, track work and record what was found, linked to the right station and equipment.
- Create and plan maintenance jobs
- Link work to stations and equipment
- Update status and record findings
- Service history alongside operating data
Incidents and inspections
Report an incident from site, record routine checks and make sure follow-up work gets arranged.
- Report incidents on site from the companion app
- Record inspections, findings and notes
- Managers review and arrange follow-up work
- Records stay linked to the right station and equipment
Permissions and activity
Access you can account for.
Every person has their own account, sees only the stations assigned to them and every action is recorded.
- Individual invited accounts, no shared logins
- Access limited per person and per station
- Authenticator verification for protected actions
- Every user action recorded
Mobile companion app
Guardian for iPhone and Android.
A companion app for station information and field records, with the same account and permissions as the dashboard.
- Station status, jobs and asset documents
- Alarm and job notifications on your phone
- Report incidents quickly from site
Can Guardian connect to our existing pump stations?
Usually, yes. We assess your controller, sensors and available signals first, then confirm the connection method and which functions each station will have.
Can we monitor a station without enabling remote control?
Yes. Monitoring and control are separate, so a station can be set up for monitoring only. Remote control needs the right station setup and authorised users.
What equipment and internet connection are needed?
The Guardian unit connects your controller or signals to Guardian, using existing site internet or a cellular connection. We confirm any extra hardware, sensors and coverage during the site assessment.
What happens when the connection drops out?
Guardian flags the lost connection so old readings aren't mistaken for current ones. Where offline recording is installed, the Guardian unit stores readings and uploads them when the connection returns.
How is Guardian priced?
Pricing depends on the number of stations, existing equipment and the functions you need. You'll get an itemised proposal covering the Guardian unit, installation and commissioning, plus any ongoing software, connectivity or support costs.
Who arranges installation, commissioning and support?
We do. We agree the scope with your team, install and commission each station, then hand over with the connected readings, approved controls and user access confirmed. The Help Centre and user guide cover day-to-day use.
Who can see or operate our stations?
Only the people you invite, each with their own account and assigned stations. Being able to view a station doesn't mean someone can operate it. Protected actions also need extra verification.
What happens after we request a demo?
Tell us your organisation, contact details, roughly how many stations you have and your timeframe. We'll be in touch to arrange a demonstration.
Let's look at your stations.
Book a demo and we'll walk you through Guardian using a station like yours.